Home > Woodworking Projects > Woodworking Custom Doors and Drawers

Woodworking Custom Doors and Drawers

Whether remodeling your kitchen or building a fine piece of furniture, our custom-made doors and drawer fronts-designed to fit your needs-are the ideal choice!

Choose from a variety of unfinished woods and door styles. Determine the sizes you need, then choose your door style, wood, and edge option.

Doors and drawer fronts, available in oak, maple, ash, cherry, and hickory, are 3/4". Plywood doors are select grade with solid wood frames, except matte white Rigid Thermo Foil (RTF), which is high-grade MDF with laminate. Raised panel style doors and both drawer front styles are solid wood.

Solid Wood Frames are available with or without mullions, glass is not included.

Pricing example:

• An 11-3/4'' Wide x 20-3/4'' High raised panel door, style #6 in oak, would cost $29.58.
• A 16" Wide x 5" High drawer front, style #7 in oak, would cost $9.30.

NOTE: Maximum door width can not exceed 26". Doors above 46" in height will have double panels. Maximum guaranteed sizes: Doors up to 23" wide and/or 46" high; drawer fronts up to 30" wide and/or 12" high.

Please read our measuring guide before ordering.

Please check measurements carefully -accuracy is essential!

After you have measured your cabinets and are ready to order, use our Online Ordering Program to order your Custom Doors and Drawer Fronts.

Custom Doors
#1 Flat Plywood - Shaker	#2 Flat Plywood - Contemporary	#3 Flat Plywood - Cathedral
#4 Solid Wood Raised Panel - Cathedral	#5 Solid Wood Raised Panel - Arch	#6 Solid Wood Raised Panel - Traditional
#11 Flat RTF- Cathedral	#12 Flat RTF - Arch	#13 Flat RTF - Traditional
#14 Solid Wood Frames - Cathedral	#15 Solid Wood Frames - Arch	#16 Solid Wood Frames - Traditional

Custom Drawer Fronts
#7 Flat Style with Curved Edges	#8 Raised Style with Curved Edges	#9 Raised Style with Chamfered Edges	#10 Flat Style RTF with Coved Edges

Available in these 5 wood species and Rigid Thermo Foil (RTF)
Red Oak	Maple	Ash
Cherry	Hickory	Rigid Thermo Foil (RTF)

Before ordering please determine the style, wood, and edge profile option you want. Measure all door and drawer front openings. For face frames, add 1" to both the width and height for all measurements. This will give you a 1/2" overlay, which is standard for most cabinetry. 

After you have measured your cabinets and are ready to order, please place your order using our Online Ordering Program.

Buy Custom Doors and Drawers