Home > Beginner Project Plans > Notepad Clock Free Project Plan

Notepad Clock Free Project Plan

This clock is a handy clock. Placed next to a telephone it is great, since you can keep notepaper in it for taking telephone messages.

Instructions

Step 1
Cut all of the pieces to overall size. Sand all surfaces, keeping all of the edges sharp.

Step 2
Locate and drill the 2 1/8-inch-diameter hole for the insert. Cut the two 45 degree top edges.

Step 3
Assemble the back board, front, and sides together—parts number 1,2, and 3.

Step 4
Cut a 1/4-inch-wide by 1/4-inch-deep dado around the bottom inside surface as shown at view A-A.

Step 5
Cut the bottom, part number 4, to size, and tack it in place. Do not glue. Make a loose fit to allow for expansion.

Step 6
Finish to suit.

Step 7
Add a battery to the clock movement, and insert it into the hole.

Step 8
Add the feet and paper, parts number 7 and 8. It's all set for years of use.

No.	Name	Size	Required
1	Back Board	3/4 x 5 1/2 - 4 1/8 Lg.	1
2	Front	3/8 x 1 1/4 - 4 7/8 Lg.	1
3	Side	3/8 x 1 1/4 - 3 7/8 Lg.	2
4	Bottom	1/4 x 3 5/8 - 4 5/8	1
5	Clock-Octagon		1
6	Brad	3/4 Long	4
7	Foot or Pad	1/2 Dia.	4
8	Paper	3 x 4 Size	1

 
  © 2011 Woodworkit - Woodworking Resource. All Rights Reserved. Contact